C613-50170-01 Rev B
Command Reference for x510 Series
1146
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
OSPF
V
3
FOR
IP
V
6 C
OMMANDS
SHOW
IPV
6
OSPF
DATABASE
NETWORK
show ipv6 ospf database network
Overview
Use this command in User Exec or Privileged Exec modes to display information
about the network LSAs.
For information on filtering and saving command output, see the
with AlliedWare Plus” Feature Overview and Configuration Guide
Syntax
show ipv6 ospf database network
<adv-router-id>
[self-originate|adv-router
<adv-router-id>
]
Mode
User Exec and Privileged Exec
Examples
To display information about the OSPFv3 network LSAs, use the following
command:
awplus#
show ipv6 ospf database network
Output
Figure 28-10: Example output from the
show ipv6 ospf database network
command
Parameter
Description
<adv-router-id>
The router ID of the advertising router, in IPv4 address format.
Note, however, that this no longer represents a real address.
self-originate
Self-originated link states.
adv-router
The advertising router selected.
OSPFv3 Router with ID (0.0.1.1) (Process P10)
Network-LSA (Area 0.0.0.0)
LS age: 97
LS Type: Network-LSA
Link State ID: 0.0.0.202
Advertising Router: 0.0.1.2
LS Seq Number: 0x800000C3
Checksum: 0x92C4
Length: 32
Options: 0x000013 (-|R|-|-|E|V6)
Attached Router: 0.0.1.2
Attached Router: 0.0.1.1
