C613-50170-01 Rev B
Command Reference for x510 Series
1135
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
OSPF
V
3
FOR
IP
V
6 C
OMMANDS
SHOW
DEBUGGING
IPV
6
OSPF
show debugging ipv6 ospf
Overview
Use this command in User Exec or Privileged Exec modes to display which OSPFv3
debugging options are currently enabled.
For information on filtering and saving command output, see the
“Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide
.
Syntax
show debugging ipv6 ospf
Mode
User Exec and Privileged Exec
Example
awplus#
show debugging ipv6 ospf
Output
Figure 28-1:
Example output from the
show debugging ipv6 ospf
command
OSPFv3 debugging status:
OSPFv3 all packet detail debugging is on
OSPFv3 all IFSM debugging is on
OSPFv3 all NFSM debugging is on
OSPFv3 all LSA debugging is on
OSPFv3 all NSM debugging is on
OSPFv3 all route calculation debugging is on
OSPFv3 all event debugging is on
