Allied Telesis x510-28GPX, Справочник по командам

Страница: 102 / 2822

C613-50170-01 Rev B Command Reference for x510 Series 102
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
CLI N
AVIGATION
C
OMMANDS
EXIT
exit
Overview This command exits the current mode, and returns the prompt to the mode at the
previous level. When used in User Exec mode, the
exit command terminates the
session.
Syntax
exit
Mode All command modes, including Global Configuration and Interface Configuration
modes.
Example The following example shows the use of the exit command to exit Interface mode,
and return to Configure mode.
awplus# configure terminal
awplus(config)# interface vlan2
awplus(config-if)# exit
awplus(config)#
Related
Commands
disable (Privileged Exec mode)
enable (Privileged Exec mode)
end