manualshive.com logo in svg

Allied Telesis GS950 PS Series, Руководство по установке, Страница: 58 / 108

Поделиться
Скачать
Allied Telesis GS950 PS Series Скачать руководство пользователя страница 58

Chapter 5: Installing the Switch on a Wall

58

Installation Guidelines

Here are the guidelines to installing the switch on a wall:

You can install the switch on a wooden or concrete wall.

If you are installing the switch on a wall with wooden studs with the 
standard brackets, you should use a plywood base to support the 
device. For more information, refer to “Plywood Base for a Wall 
with Wooden Studs” on page 61.

You should not install the switch on a wall that has metal studs. 
Metal studs may not be strong enough to safely support the 
device.

You should not install the switch only on sheetrock or similar 
material. Sheetrock might not be strong enough to safely support 
the device.

Warning

The device should be installed on a wall by a qualified building 
contractor. Serious injury to yourself or others or damage to the 
equipment may result if it is not properly fastened to the wall. 

 

E105

Warning

The device is heavy. Use both hands to lift it. You might injure 
yourself or damage the device if you drop it. 

 

E94

Note

Airflow in the switch is from left to right, when facing the front of the 
device.

Содержание GS950 PS Series













































































































Отзывы:

Нет отзывов