manualshive.com logo in svg

Allied Telesis AT-WCP201G, Руководство по установке, Страница: 69 / 73

Поделиться
Скачать
Allied Telesis AT-WCP201G Скачать руководство пользователя страница 69

AT-WCP201G Wireless Adapter Card Installation Guide

69

6. Click 

Key Index

 and specify the position of the encryption key in the 

encryption key table on the wireless router or access point. The range 
is 1 to 4.

7. Click 

OK

.

WPA/WPA2-

PSK Security

To configure the Wireless Network Properties window for WPA-PSK or 
WPA2-PSK security, do the following:

1. Click the 

Network Name (SSID)

 field, enter the SSID of the wireless 

network. The network name is case sensitive.

2. Click the 

Network Authentication

 parameter and from the pull-down 

menu select either 

WPA-PSK

 or 

WPA2-PSK

.

Note

Do not select WPA2-PSK unless the wireless router or access point 
supports WPA2.

3. Click the 

Data Encryption

 parameter and from the pull-down menu 

select either 

TKIP

 or 

AES

.

4. In the 

Network Key

 and 

Confirm Network Key

 fields, enter the router 

or access point’s passphrase (also referred to as the shared secret).

5. Click 

OK

.

Содержание AT-WCP201G










































































Отзывы:

Нет отзывов