Allied Telesis
www.alliedtelesis.com
Datasheet |
integrated Multiservice Access Platform
FX10FX
AT-TN104-A 10 Port 100Mbps FX FTTx Service Module
Fiber to the Business over
Multi-mode Dual Fiber
The 10 x 100FX is one of three Allied Telesis
FTTH/B service modules for the iMAP product
family.This card provides 10 ports at 100Mbps
(full-duplex) over two fibers (Multi-mode). Also
available are Single-mode single fiber and dual
fiber variations. The Gigabit feed into the iMAP
backplane allows the FX10 modules to operate
completely at wirespeed.
The additional Layer 2+ switching allows
Service Providers to meet the demands of
multi-cast IP video,Video on Demand, voice and
data services. With the FX10 modules, you can
be assured future bandwidth needs of HDTV
will be addressed as consumer demand
increases.
Allied Telesis’ OAM solution allows for individual
full configuration and monitoring of each port.
The FX10 modules provide configuration tools
to:
•
Control or limit subscriber access
•
Enforce port security rules
•
Limit services to a port
•
Manage QoS across the card
•
Support network double-tagging
•
Control ingress or egress service rates
A multitude of applications can be supported
with the fiber-based 100Mbps access interfaces
including:
•
FTTH for Voice,Video and Data Services
•
FTTB for IP PBX, Ethernet and VPN services
•
Campus LAN network uplinks
Whether it is derived voice or HDTV IP Video,
the FX10 will satisfy all bandwidth and mission
critical services with ease.
Part of Allied Telesis’ IP Broadband
Access Family
Whether it is broadband ADSL2+, FTTH, POTS
or T1/E1 circuits, the iMAP family is the ideal
platform for last mile service delivery.The
FX10FX line card can be used with any of the
iMAP family of carrier grade, IP Multiservice
Access platforms:
•
iMAP 9700 (9RU, 17 service slots)
•
iMAP 9400 (3RU, 7 service slots)
•
MiniMAP 9100 (1RU, 3 service slots)
Provisioning, management, and diagnostics of
subscriber ports can be accomplished from
either the iMAP command line interface or the
NMS.
The FX10FX has been designed to survive the
most rugged environmental conditions. It can be
confidently deployed in either a central office or
in outdoor enclosures withstanding extremes of
heat, cold, and light exposure.
Allied Telesis provides a large portfolio of FTTx,
Ethernet and xDSL transport and access
equipment. In addition, Allied Telesis provides a
complete set of xDSL and FTTx CPE solutions
in the form of Multiservice Gateways, Layer 2/
Layer 3 switches, routers or media converters
to terminate the broadband link.
Key Features
Port-based
•
VLANs
•
VLAN translation
•
Double-tagging (HVLAN)
•
Filtering
•
Ingress metering
•
Egress port rate limiting
•
Countings
•
Classification and remarking
•
RMON
QoS
•
Four queues
•
Priority Scheduling
Security
•
MAC limiting (up to 64)
•
MAC flooding – VLAN-based
Services
•
STP and RSTP
•
Video-optimized
•
Upstream forwarding only
Support for
•
Business Services
•
Dual fiber, Multi-mode
