Allied Telesis AT-IMC2000T/SC, Руководство по установке

Страница: 30 / 58

IMC2000/200 Series Media Converter Installation Guide
30
Unpacking the Media Converter
To unpack the media converter, perform the following procedure:
1. Remove all of the components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Place the media converter on a level, secure surface.
3. Verify that the hardware components are included in your switch
package.Table 7 shows a list of the hardware components.
Table 6. Components in the Shipping Box
Component Illustration
One bracket for DIN rail
(Pre-installed)
Two screws for the bracket
(Pre-installed)
One 2-pin terminal block for
DC power