Translated Electrical Safety and Emission Information
38
Standards
: This product meets the following standards.
1
RFI Emission
FCC Class B, EN55022 Class B,
VCCI Class B, C-TICK
2
WARNING
: In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
3
Immunity
EN55024
4
Electrical Safety
EN60950 (TUV), UL60950 (
c
UL
us
), CE
SAFETY
5
ELECTRICAL NOTICES
WARNING:
ELECTRIC SHOCK HAZARD
To prevent ELECTRIC shock, do not remove the cover. No user-serviceable parts
inside. This unit contains HAZARDOUS VOLTAGES and should only be opened by a
trained and qualified technician. To avoid the possibility of ELECTRIC SHOCK,
disconnect electric power to the product before connecting or disconnecting the
LAN cables.
U.S. Federal Communications Commission
Declaration Of Conformity
Manufacturer Name:
Allied Telesyn, Inc.
Manufacturer Address:
960 Stewart Drive, Suite B
Sunnyvale, CA 94085 USA
Manufacturer Telephone:
408-730-0950
Declares that the product:
Gigabit Ethernet Switch
Model Numbers:
AT-GS905
This product complies with FCC Part 15B, Class B Limits:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device must not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Radiated Energy
Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to
Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with instructions, may cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on. The user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes and modifications not expressly approved by the manufacturer or registrant of this equipment can void
your authority to operate this equipment under Federal Communications Commission rules.
Canadian Department of Communications
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du
Canada.
