AT-GS905 Gigabit Ethernet Switch Installation Guide
27
Wall- Mounting the Switch
The AT-GS905 switch can be used on a desktop or mounted onto a wall.
To use the switch on a desktop, refer to
Using the Switch on a Desktop
on page 26.
To mount an AT-GS905 switch onto a wall, perform the following
procedure:
1. Remove all equipment from the package and store the packaging
material in a safe place.
2. Select a wall location for the switch.
3. Mark two hole locations (3-3/8 inches apart) on the wall.
4. At the two marked locations for the holes, pre-drill for the drywall
anchors (provided) and drive the screws (provided) through the
holes.
5. Align the switch horizontally, as illustrated in Figure 6.
Figure 6
Aligning an AT-GS905 Switch For Wallmount Installation
A T-G
S905
10/100
/1000 Ba
se-T
Gig
abit E
therne
t Sw
itch
PO
WER
1
2
3
4
5
100M
1000M
LNK/ACTFDX
2
3
4
1
5
