Allied Telesis AT-FS710/16, Руководство по установке

Страница: 37 / 64

FS710 Series Ehternet Switch Installation Guide
37
Figure 16. Wall Mounting Hole Locations for Up or Down Facing Ports
6. At the marked locations on the wall, drill two 6mm (approximately
1/4in) holes for the anchors.
7. Insert the two 10mm x 22mm nylon anchors until the shoulder of the
anchor is flush with the wall.
8. Install the two 3.5mm x 16mm pan-head screws. Turn the screw head
until it is 6mm (approximately 1/4in) from the surface of the wall.
9. Position the switch so that the Ethernet ports are physically oriented in
the direction (left, up or down) that you have chosen.
10. Align the switch such that the two key-hole slots on the back of the
switch chassis line up over the two screw heads.
11. Align the switch chassis over the two screws (towards the wall) as
illustrated in Figure 17 and slide it down until it is locked on the two
screw heads .