Allied Telesis ANC10 Series Скачать руководство пользователя

Страница: 30 / 124

Chapter 2: Installing the Hardware

Pre-Installation Checklist

Before installing the network interface card, perform the following
procedure:

1. Check that your computer has an appropriate open PCIe slot.

2. Verify that your system is using the latest BIOS.

3. When you download the driver software from the Allied Telesis

website, record the path to where the driver file resides on your
system.

4. If your system is active, shut it down.

5. When the system shutdown is complete, unplug the power cord.

6. Holding the network interface card by the edges, remove it from its

shipping package and place it on an antistatic surface.

7. Check the network interface card for visible signs of damage,

particularly on the card’s edge connector.

Note

Do not attempt to install a damaged network interface card. If the
card is damaged, report it to Allied Telesis. See “Contacting Allied
Telesis” on page 15.

Содержание ANC10 Series





























































































































Результаты поиска

Содержание ANC10 Series

Отзывы:

Похожие инструкции для ANC10 Series

Бренды по названию

Популярные бренды

Allied Telesis ANC10 Series, Инструкция по установке и эксплуатации

Результаты поиска

Содержание ANC10 Series

Отзывы:

Похожие инструкции для ANC10 Series

Бренды по названию

Популярные бренды