C613-22132-00 REV A
How to use the 5G cellular modem
|
Page
12
5G Mobile Broadband UTM Firewall
Show commands to monitor what is happening
The
show 5g sim
command displays details about the SIM card, the state of the network and APN
configuration attached to the SIM card. For the SIM card slot to be active the administration state
must be up, a valid APN profile must be configured and attached to the ‘
wwan0
’ interface.
The
show 5g sim detail
command displays details about the active SIM such as the Integrated
Circuit Card ID (ICCID). This 19-20 digit number is typically printed on the back of the SIM card. The
ICCID is a globally unique serial number that identifies the SIM card.
awplus#
show 5g sim
Slot 1 is : Present
Slot 1 administrative state : Up
Slot 1 present, up and configured : Yes
Slot 1 is : Active
Slot 1 APN : carrier1
Slot 1 APN name : carrierabc
Slot 1 User name : Not Set
Slot 1 Password : Not Set
Slot 1 Authentication type : Not Set
Slot 1 Packet data protocol type : ipv4v6
Slot 1 Carrier name : generic
Slot 2 is : Present
Slot 2 administrative state : Up
Slot 2 present, up and configured : Yes
Slot 2 is : Backup
Slot 2 APN : carrier2
Slot 2 APN name : carrierxyz
Slot 2 User name : Not Set
Slot 2 Password : Not Set
Slot 2 Authentication type : Not Set
Slot 2 Packet data protocol type : ipv4v6
Slot 2 Carrier name : generic
SIM Failover Interval : 300 seconds
Network is running : True
awplus#
show 5g sim detail
Current SIM Details:
Slot 1 is : Present
Slot 1 administrative state : Up
Slot 1 present, up and configured : Yes
Slot 1 is : Active
Slot 1 APN : carrier1
Slot 1 APN name : carrierabc
Slot 1 User name : Not Set
Slot 1 Password : Not Set
Slot 1 Authentication type : Not Set
Slot 1 Packet data protocol type : ipv4v6
Slot 1 Carrier name : generic
Slot 1 ICCID : 8964011910081631877