Allied Telesis 29M2/SP-BA, Инструкция по установке и эксплуатации

Страница: 55 / 90

Chapter 4: Modifying Advanced Properties
55
Interrupt Moderation
The Interrupt Moderation feature allows you to limit the rate of interrupts to
the CPU during packet transmission and packet reception. When this
feature is enabled, interrupts are handled as a group so that the CPU
utilization decreases; however, the latency may increase.
To enable or disable the Interrupt Moderation feature, do the following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 49.
2. Select
Interrupt Moderation
in the Property box.
The Interrupt Moderation page is displayed as shown in Figure 24.
Figure 24. Interrupt Moderation Page
3. Select one of the following options:

Disable —
The Interrupt Moderation feature is disabled

Enable —
The Interrupt Moderation feature is enabled. This is the
default setting.
4. Click OK .