Allied Data Tornado SFM 56.0, Руководство пользователя

Страница: 32 / 110

TORNADO SFM 56.0
30 Allied Data Technologies
3.3 Description of the S registers
The S registers are described in this part of the manual. Each register has a specific
value. The factory setting is shown in the first line. The registers marked * are stored in
non-volatile memory by the command AT&W.
S38 020 0-255 Off line delay (error corrected modes
only) 38
S39 * 003 0,3-6 Flow control 38
S40 * 105 Bitmap register 39
S41 * 131 Bitmap register 40
S46 * 138 136,138 Data compression 40
S48 * 007 0,7,128 V42 negotiation 40
S80 * 001 Soft Switch functions (placed directly in
EEROM) 40
S82 128 3,7,128 Break option LAPM connections 40
S95 * 033 Extended response 41
S0 * 000 0-99 Auto-answer
Setting that determines the number of rings before the modem goes on line.
Auto-answer is disabled as the default setting. Auto-answer can be switched on,
for example with S0=1.
N.B. If you want to enable the modem select option you should give S0 the
value 102.
S1 000 0-255 Ring counter
Counts the number of incoming ring signals and places them in this register. 0-
255 signals can be recorded. The register is reset when the modem answers the
line.
S2 * 043 0-255 Escape code character
REG &W DEFAULT RANGE DESCRIPTION page