manualshive.com logo in svg

Allice Messtechnik R&S ZND, Руководство пользователя, Страница: 952 / 1252

Поделиться
Скачать
Allice Messtechnik R&S ZND Скачать руководство пользователя страница 952

Command reference

R&S

®

ZND

952

User Manual 1173.9557.02 ─ 61

[SENSe<Ch>:]CORRection:COLLect:AUTO:TYPE 

<CalType>[, <Characterization>[,

<TestPort1>[, <TestPort2>]...]]

Selects and initiates an automatic calibration at arbitrary analyzer and cal unit ports.
This command also selects the calibration type. A progress monitor for the calibration
sweeps is displayed.

Tip:

 If the test setup contains a high attenuation the analyzer may fail to detect the cal

unit ports connected to each of its ports. In this case use the extended command

[SENSe<Ch>:]CORRection:COLLect:AUTO:PORTs:TYPE

.

If several calibration units are connected, use 

SYSTem:COMMunicate:RDEVice:

AKAL:ADDRess

 to select a unit for the calibration.

Suffix: 

<Ch>

.

Channel number of the calibrated channel

Setting parameters: 

<CalType>

FNPort | TOSM | FOPort | OPTPort | FRTRans | FTRans |
RTRans | REFL | RSHort
Calibration Type

FNPort

Full n-port (UOSM) calibration

TOSM

Full n-port calibration with characterized Through.
If the selected cal unit characterization does not contain a
Through characterization, the command silently falls back to a
FNPort (UOSM) calibration.

FOPort

Full one-port ("Refl OSM") calibration

OPTPort

"One Path Two Ports" calibration
If the selected cal unit characterization does not contain a
Through characterization, the command will fail.

FRTRans

Transmission normalization, bidirectional
If the selected cal unit characterization does not contain a
Through characterization, the command will fail.

FTRans | RTRans

Transmission normalization, forward | reverse
If the selected cal unit characterization does not contain a
Through characterization, the command will fail.

REFL

Reflection normalization, Open

RSHort

Reflection normalization, Short

<Characterization>

Location of the characterization (cal kit file) to be used for the
automatic calibration (string parameter):

SCPI command reference

www.allice.de

Allice Messtechnik GmbH

Содержание R&S ZND





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов