Command reference
R&S
®
ZND
712
User Manual 1173.9557.02 ─ 61
Example:
Suppose that the active recall set contains an active trace no. 1
and the sweep range for a frequency sweep starts at 1 GHz.
CALC:MARK ON
Create marker no. 1 and display it in the center of the sweep
range.
CALC:MARK:X 1GHz
Set the marker to the beginning of the sweep range.
Manual operation:
"Mkr <i> Stimulus / Ref Mkr Stimulus"
CALCulate<Chn>:MARKer<Mk>:Y
<ResponseValue>
Sets or gets the (response) value of the related marker.
The marker must be created before using
CALCulate<Chn>:MARKer<Mk>[:STATe]
.
Setting this value is only possible in ARBitrary mode (see
. For NORMal and FIXed mode markers it is read-only.
Suffix:
<Chn>
.
Channel number used to identify the active trace
<Mk>
Marker number.
Parameters:
<ResponseValue>
Setting (ARBitrary mode only):
sets the vertical position of the
marker in Y units of the current trace format.
Query:
returns the marker position formatted according to the
current marker format (see
), i.e. as displayed in the marker info field (1 return value
per row in the response column). Indetermined result values are
returned as a sequence of dashes (------). This may occur in
ARBitrary mode, if the transformation between trace format and
marker format requires a concrete stimulus value.
Default unit: NN
Example:
Suppose that the active recall set contains an active trace no. 1.
CALC:MARK ON
Create marker no. 1 and display it in the center of the sweep
range.
CALC:MARK:Y?
Query the measurement value at the marker position.
CALC:MARK:STAT:AREA LEFT, TOP
For a subsequent check at the GUI or a hardcopy, move the info
field to the top left position.
Manual operation:
"Mkr <i> Arb. Response / Ref Mkr Arb. Response"
SCPI command reference
www.allice.de
Allice Messtechnik GmbH