Allice Messtechnik R&S ZND, Руководство пользователя, Страница: 483 / 1252

GUI reference
R&S
®
ZND
483 User Manual 1173.9557.02 ─ 61
Port Order
Tells the EZD tool about the port ordering of the test coupon
●
"Odd on left" (default): odd ports are on the left and even ports are on the right
●
"1 to N on left" ports 1 to N are on the left and ports N+1 to 2·N are on the right
Remote command:
CALCulate:FMODel:EZD:PORT:ORDer
Generate Side 1/Generate Side2
If checked (default), the tool generates the deembedding file for side 1 / side 2.
Remote command:
CALCulate:FMODel:EZD:GENerate:SIDE<1|2>
DC Extrapolation
If unchecked (default), the touchstone data of the generated deembedding file reach
down to the start frequency of the instrument sweep. If checked, the EZD tool adds
(extrapolated) S-parameter data for f = 0.
Remote command:
CALCulate:FMODel:EZD:DCEXtrapolat
Impedance Correction Settings
Provides additional settings for the impedance correction of the EZD tool, if enabled in
the main dialog (see
Use Impedance Correction ).
Remote command:
CALCulate:FMODel:EZD:IMPedance:REFerence
CALCulate:FMODel:EZD:IMPedance:BWIDlimit
5.13.6 Port Sets tab
Selects transformation networks for deembedding/embedding arbitrary port sets,
defines their parameters, assigns them to a port set and enables embedding.
Use the complementary dock widget to create the required port sets and to activate or
deactivate dembedding/embedding for selected port sets (see
Chapter 5.13.1.4, "Port
Sets panel" , on page 453).
Background information
Refer to Chapter 4.6.2.5, "Port pair de-/embedding" , on page 193 and Chapter 4.6.2.6,
"Port set de-/embedding" , on page 193.
Offset Embed softtool
www.allice.de Allice Messtechnik GmbH