GUI reference
R&S
®
ZND
330
User Manual 1173.9557.02 ─ 61
Show Limit Circle
Shows or hides the limit line associated with the active trace in a polar diagram area.
The limit line colors are defined in the "Define User Color Scheme" dialog (see
ter 5.16.3.2, "Define User Color Scheme dialog"
on page 532). You can choose
between various options:
●
Assign the same color to traces and associated limit lines.
●
Assign different colors to limit line segments with disabled limit check.
Note:
Display of the limit line and limit check are independent of each other: Hiding the
limit line does not switch off the limit check.
Remote command:
CALCulate<Chn>:LIMit:CIRCle:DISPlay[:STATe]
Limit Check
Switches the limit check of the active trace on or off.
Lines softtool
www.allice.de
Allice Messtechnik GmbH