manualshive.com logo in svg

Allice Messtechnik R&S ZND, Руководство пользователя, Страница: 263 / 1252

Поделиться
Скачать
Allice Messtechnik R&S ZND Скачать руководство пользователя страница 263

GUI reference

R&S

®

ZND

263

User Manual 1173.9557.02 ─ 61

Additional Input ← Permanent ← Loaded DLLs table

Specifies additional input that further specifies the permanent task to be performed by
the external DLL.

This string is processed by the external DLL, with DLL-specific syntax and semantics.
If it is malformed or inappropriate for some reason, the firmware logs and displays the
error messages that are returned by the DLL. See the docs of your DLL for details.

Remote command: 

[SENSe<Ch>:]CDLL:PERManent:ADDitional

Version/Interface Version ← Loaded DLLs table

"Version" is purely informative. It reports the version of the DLL, as specified by its
developer.

"Interface Version" is the version of the plug-in SDK that was used to compile the DLL
(more precisely, the version of the interface 

RsVnaCustomDllInterface.h

 against

which it was compiled). This version can change the DLL handling of the analyzer firm-
ware.

Add / Remove

Allows you to add/remove custom plugins to/from the analyzer firmware.

A plug-in is installed as a 

*.zip

 file, containing a DLL and, possibly, some additional

files.

The firmware must be run as administrator to add or remove custom plugins. Once
installed, standard user privileges are sufficient to use a plugin's functionality.

Remote command: 

[SENSe:]CDLL:ADD
[SENSe:]CDLL:REMove

Meas softtool

www.allice.de

Allice Messtechnik GmbH

Содержание R&S ZND





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов