Alliant Networks CGW101, Руководство пользователя

Страница: 40 / 83

Using the Web Configuration Interface Using the Discovery Tool
40
Using the Discovery Tool
Initially, the gateway may not match your network’s subnet. This prevents your computer
from accessing the gateway configuration web pages. The Alliant Discovery Tool solves this
problem by finding the gateway on your network and allowing you to assign it an IP address
on the same subnet as your computer, and launch the gateway configuration pages in a
Web browser. The Discovery Tool must be installed on a computer that has an Ethernet
adapter or a wireless card.
After the Discovery Tool is installed on your computer (see Using the Discovery Tool ), make
sure that the gateway is either wired to the same network, associating with the same
wireless network, or connected directly to the computer, and that the gateway is connected
to power. If more than one gateway is connected, make a note of the MAC address of the
gateway you want to select so that you can identify it in the Discovery Tool.
1. To launch the Alliant Discovery Tool:
Windows: Select Start /Programs /Alliant / Discovery Tool .
Unix: From a shell, enter the following command: discHost
The Discovery Tool window appears.
2. Click Discover devices .
All detected Alliant Networks gateways on the network are listed in the Device List pane.
3. In the Device List pane, select the gateway you want to configure. If more than one
gateway is listed, you can identify the one you want by its MAC address. To select the
gateway, click anywhere in its listing.
In the Device Properties list, make a note of the gateway IP address and subnet mask.
Enter a new IP address in the space provided. (The default is: 192.168.0.1)
Optionally, you can enter the Subnet mask for the gateway.
4. Right click anywhere in the Discovery Tool window to launch the Web configuration
interface.