Alliant Networks CGW101, Руководство пользователя

Страница: 26 / 83

Introduction Serial passthrough
26
Serial passthrough
The serial passthrough converts serial data from the DB9 interface to IP network traffic. With
this passthrough, a TCP or UDP socket-based application can communicate with a serial
device. The gateway does not interpret or change any of the serial data. For more
information, see the
Advanced Operations Guide .
I/O passthrough
The I/O passthrough converts data from the DB25 interface to IP network traffic. Like serial
passthrough, this type of passthrough supports the connection modes TCP Connect, TCP
Listen, and UDP. For more information, see the
Advanced Operations Guide .
Data transfer protocol
The I/O passthrough data format uses XML to transfer information between the remote host
and the bridge. For more information, see the
Advanced Operations Guide .
About this guide
This guide is intended primarily to be viewed on your computer, and it provides hot links to
referenced topics. If you print this guide, references and indexes list page numbers, so you
can easily find referenced topics by turning to the listed page number.
Turn or jump to the following topics for more information:
• For detailed installation instructions, see Installation on page 28.
•
For a description of the Alliant Web Configuration Interface, which allows you to
configure device features, see
Using the Web Configuration Interface on page 39.