© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
201956
2
Washer Dimensions
Before You Start
Supplies
For most installations, the basic supplies you will need
are:
Parts Included
An accessories bag has been shipped inside your
washer. It includes:
•
Two fill hoses with washers and filter screens.
Refer to step 3 of
Installation
.
•
Four rubber feet. Refer to step 5 of
Installation
.
•
Beaded strap. Refer to step 4 of
Installation
.
•
Installation Instructions.
•
User’s Guide.
•
Warranty Bond.
NOTE: If the washer is delivered on a cold day
(below freezing), or is stored in an unheated room
or area during the cold months, do not attempt to
operate it until the washer has had a chance to
warm up.
NOTE: Install dryer before washer. This allows
room for attaching exhaust duct.
*With leveling legs turned into base.
TLW2075N
Figure 1
71.1 cm (28 in.)
*134
.6 cm
(
53 in.
)
1 cm
(.4 in.)
66 cm (26 in.)
65 cm (25.6 in.)
*73.
7 cm
(2
9 in.
)
*1
09.
2 cm (43
i
n
.)
*91.
4
c
m
(36 i
n
.)
56.2 cm (22.13 in.)
*1
02.
2 cm (40
.2
5
i
n
.)
TLW1978N
1
Safety Glasses
2
Wood Block
3
Wrench
4
Screwdriver
5
Pliers
6
Level
Figure 2
1
2
5
6
4
3
