Distance “D” - 100 mm on the side with the pulley, 75 mm on the side without the pulley.
1.
Rubber bushing
2.
Limiter
3.
Face of the drum
4.
Control element
5.
Out-of-balance switch
6.
Adjustment nut
7.
Switch holder
Figure 27
TIGHTENING MOMENTS
WARNING
REGULARLY, EVERY THREE MONTHS OR EVERY
500 WORKING HOURS (WHICH EVER COMES FIRST)
INSPECT THE TIGHTNESS OF THE BOLTS.
C213
If any of the bolts have been damaged, exchange them with bolts
of the same strength value marked on its head. The best way is to
order original Parts is by consulting the Parts Manual.
WARNING
REPLACE DAMAGED BOLTS WITH ONE OF THE
SAME STRENGTH VALUE MARKED ON ITS HEAD!
IGNORING THE BOLT QUALITY AND MECHANICAL
STRENGTH CAN CAUSE SERIOUS BODILY INJU-
RIES.
C214
Tighten the loosened bolts using the torque value stated in the
following table:
TIGHTENING MOMENTS VALUES OF BOLTS, (FIGURE: "MARKING OF THE BOLTS")
BOLT
DIMEN-
SION
NUMBER
OF pcs.
TIGHTENING MOMENTS (Nm)
TIGHTENING MOMENTS (lbf.ft)
A
M12 x 60
2
89
65
Table 9
MAINTENANCE
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
55
Part No. D1612ENR3
