Diagnosing Failure 6
3. Check the good functioning
of the "DOOR SWITCH" at
the inputs menu.
If the input is not functional
replace the wash computer.
Table 57
Failure 7: Door Lock Switch Failure
While a wash cycle is running: the internal door lock systems are
scanned all the time. If during the wash cycle the electronic wash
computer detects that the door lock switch is not closed, then the
machine will immediately stop all its functions. The door will
stay locked.
Diagnosing Failure 7
1. Check the well functioning
of the door lock switch. The
door lock switch is a normal
open contact.
If the door lock switch is bro-
ken or doesn't function correct:
replace the door lock.
2. Check the door lock coil.
If the door lock coil doesn’t
function: replace the door
lock.
3. Check the mechanical func-
tionality of the door lock.
If the door lock is not func-
tioning mechanically: replace
the door lock.
4. Check the continuity of the
wiring.
If the wiring is not continuous:
repair the wiring.
5. Check the good functioning
of the door lock switch at the
inputs menu.
If the input is not functional
replace the wash computer.
Table 58
Failure 8: Door Close Check at Start Failure
The washing machine will not start a new process when the door
is not locked after pressing the START button. Failure message 8
will be generated each time the door lock sequence could not be
finished once started because door was opened during locking se-
quence.
Diagnosing Failure 8
1. Check door handle for dam-
age traces and centering
against door lock.
If handle is damaged, replace
handle.
If not good centered, center
door against door lock.
Table 59
continues...
Diagnosing Failure 8
2. Check if the input connector
DL (door lock) is connected.
If the input connector DL
(door lock) is not connected :
connect connector DL.
3. Check the well functioning
of the door lock switch.
If the door lock switch is bro-
ken or doesn't function correct:
replace the door lock
4. Check the door lock coil.
If the door lock coil doesn’t
function: replace the door lock
coil.
5. Check the mechanical func-
tionality of the door lock.
If the door lock is not func-
tioning mechanically and can
not be corrected: replace the
door lock system.
6. Check the continuity of the
wiring.
If the wiring is not continu-
ous : repair the wiring.
7. Check the output relay that
powers the door lock coil.
If the relay is broken, replace
the wash computer.
8. Check the good functioning
of the door lock switch at the
inputs menu.
If the input is not functional
replace the wash computer.
Table 59
Failure 9: Door Lock Switch Failure at Cycle End
At the end of the cycle the Door Lock coil is switched off and the
door lock switch must open its contact. If within 30 seconds the
"DOOR LOCK SOLENOID SWITCH" doesn’t change state fail-
ure message 9 will be displayed. As long the contact stay closed,
failure message 9 stays on the display. If the contact should
change state, the error message will be removed from the display
and machine will be ready for use again.
Diagnosing Failure 9
1. Check the functioning of the
door lock switch.
If the door switch is broken or
doesn't function correct: re-
place the door lock.
2. Check the door lock coil.
If the door lock coil doesn’t
function: replace the door
lock.
3. Check the mechanical func-
tionality of the door lock.
If the door lock is not func-
tioning mechanically and can
not be corrected: replace the
door lock system.
4. Check the continuity of the
wiring.
If the wiring is not continuous:
repair the wiring.
Table 60
continues...
Troubleshooting
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
90
Part No. D1631ENR7
Содержание IYG065J
Страница 2: ......
