12
F238000
Section 3 Troubleshooting
To reduce the risk of electrical shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer-extractor before servicing.
• Never start the washer-extractor with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer-extractor is properly grounded.
W171
WARNING
14. EXCESSIVE VIBRATION AND/OR NOISE DURING SPIN
15. EXCESSIVE CYCLE TIME
POSSIBLE CAUSE
TO CORRECT
Inadequate foundation or loosened bolt.
• Tighten bolts, be sure the foundation is adequate for the
machine.
POSSIBLE CAUSE
TO CORRECT
Insufficient water supply to machine.
• Water supply lines must be of adequate size.
• Water pressure is too low — increase if possible.
Clogged inlet valve strainer.
• Check inlet valve strainer and clean as required.
Clogged inlet hose strainer.
• Check inlet hose strainer and clean as required.
