background image

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Safety Information

513220

4

13. Keep area around the exhaust opening and 

adjacent surrounding area free from the 
accumulation of lint, dust and dirt.

14. The interior of the dryer and the exhaust duct 

should be cleaned periodically by qualified 
service personnel.

15. If not installed, operated and maintained in 

accordance with the manufacturer’s instructions 
or if there is damage to or mishandling of this 
product’s components, use of this product could 
expose you to substances in the fuel or from fuel 
combustion which can cause death or serious 
illness and which are known to the State of 
California to cause cancer, birth defects or other 
reproductive harm.

16. Dryer will not operate with the loading door 

open. DO NOT bypass the door safety switch by 
permitting the dryer to operate with the door 
open. The dryer will stop tumbling when the door 
is opened. Do not use the dryer if it does not stop 
tumbling when the door is opened or starts 
tumbling without pressing the START 
mechanism. Remove the dryer from use and call 
the service person.

17. Do not put articles soiled with vegetable or 

cooking oil in the dryer, as these oils may not be 
removed during washing. Due to the remaining 
oil, the fabric may catch on fire by itself.

18. To reduce the risk of fire, DO NOT put clothes 

which have traces of any flammable substances 
such as machine oil, flammable chemicals, 
thinner, etc., or anything containing wax or 
chemicals such as in mops and cleaning cloths, or 
anything dry-cleaned at home with a dry-
cleaning solvent in the dryer.

19. Use the dryer only for its intended purpose, 

drying clothes.

20. Always disconnect the electrical power to the 

dryer before attempting service. Disconnect the 
power cord by grasping the plug, not the cord.

21. If supply cord is damaged, it must be replaced by 

a special cord or assembly available from the 
manufacturer or its service agent.

22. Install this dryer according to the 

INSTALLATION INSTRUCTIONS. All 
connections for electrical power, grounding and 
gas supply must comply with local codes and be 
made by licensed personnel when required. Do 
not do it yourself unless you know how!

23. Remove laundry immediately after the dryer 

stops.

24. Always read and follow manufacturer’s 

instructions on packages of laundry and cleaning 
aids. Heed all warnings or precautions. To reduce 
the risk of poisoning or chemical burns, keep 
them out of reach of children at all times 
(preferably in a locked cabinet).

25. Do not tumble fiberglass curtains and draperies 

unless the label says it can be done. If they are 
dried, wipe out the cylinder with a damp cloth to 
remove particles of fiberglass.

26. ALWAYS follow the fabric care instructions 

supplied by the garment manufacturer.

27. Never operate the dryer with any guards and/or 

panels removed.

28. DO NOT operate the dryer with missing or 

broken parts.

29. DO NOT bypass any safety devices.

30. Failure to install, maintain, and/or operate this 

machine according to the manufacturer’s 
instructions may result in conditions which can 
produce bodily injury and/or property damage.

IMPORTANT: Solvent vapors from dry-cleaning 
machines create acids when drawn through the 
heater of the drying unit. These acids are corrosive 
to the dryer as well as to the laundry load being 
dried. Be sure make-up air is free of solvent vapors.

IMPORTANT: Have your dryer installed properly. 
Don’t do it yourself unless you know how!

NOTE: The WARNING and IMPORTANT 
SAFETY INSTRUCTIONS appearing in this 
manual are not meant to cover all possible 
conditions and situations that may occur. Common 
sense, caution and care must be exercised when 
installing, maintaining, or operating the dryer.

Always contact your dealer, distributor, service agent 
or the manufacturer about any problems or conditions 
you do not understand.

Содержание DRY684C





































Отзывы: