Alliance Laundry Systems BCA Series Скачать руководство пользователя

Страница: 103 / 112

DCJ, HCT, SCH and SCT Models with N and W

Controls

Figure 60

1. Press the Regular, Deluxe or Ultra keypad to choose the de-

sired soil level. The corresponding LED indicates the selec-
tion.

2. Press the Normal, Perm Press (if available) or Delicates/

Bulky keypad to choose the desired cycle. The corresponding
LED indicates the selection.

3. Press the Hot, Warm or Cold keypad to choose the desired

temperature. The corresponding LED indicates the selection.

4. Insert coin(s) or card as necessary.

• If the machine is a coin operated unit, add coins. As each

coin is added, the vend counts down to the amount re-
maining.

• If the machine is a card operated unit, insert and remove

card per card system instructions.

• If the unit is interfaced to a central/remote pay system, go

to the central/remote pay console, make payment and se-
lect the machine and follow central/remote pay system in-
structions.

5. Add liquid and/or powder supplies to supply dispenser. Refer

Table 45

a. Detergent:

• Liquid - Compartment 1 (prewash) + Compartment 3
• Powder - Compartment 1 (prewash) + Compartment 2

b. Bleach:

• Liquid - Compartment 3
• Powder - Compartment 2

c. Softener:

• Liquid - Compartment 4

6. Press the START (enter) keypad to select.

NOTE: Cycles can be changed anytime during the
first Fill Step. After the first Fill Step, all cycle key-
pad presses are ignored.

7. When a cycle is complete, the control displays

OPEN

DOOR

HCA, HCD, HCE, HCH, HCJ and HCU Models with

N and W Controls

CHM1795C_SVG

Rinse

Wash

Insert

Coins/Card

Spin

Door

START

Figure 61

1. Press the Normal 90C, Normal 60C, Normal 40C, Perm Press

90C, Perm Press 60C, Gentle 30C or Perm Press 50C keypad
to choose the desired cycle/temperature. The corresponding
LED indicates the selection.

2. Press the Extra Wash and/or Extra Rinse keypads to add

modifiers to the cycle. The corresponding LEDs indicate the
added modifiers.

3. Insert coin(s) or card as necessary.

• If the machine is a coin operated unit, add coins. As each

coin is added, the vend counts down to the amount re-
maining.

• If the machine is a card operated unit, insert and remove

card per card system instructions.

• If the unit is interfaced to a central/remote pay system, go

to the central/remote pay console, make payment and se-
lect the machine and follow central/remote pay system in-
structions.

Operation

DO NOT COPY or TRANSMIT

103

Part No. F8619501ENR11

Содержание BCA Series

















































































































Результаты поиска

Содержание BCA Series

Отзывы:

Похожие инструкции для BCA Series

Бренды по названию

Популярные бренды

Alliance Laundry Systems BCA Series, Установка, эксплуатация и обслуживание

Результаты поиска

Содержание BCA Series

Отзывы:

Похожие инструкции для BCA Series

Бренды по названию

Популярные бренды