Allflex AWR300 User Guide
13/11/19
Page 42
In this screen, the AWR300 has joined the configured Access
Point (WLAN symbol turned into blue) and the Status has
changed to ‘waiting for connect’.
Device shows the IP address (192.168.1.3) of the AWR300
plus the configured port (2010).
Now the host can open a connection by using this IP address
and this port.
Here the host has opened the connection (WLAN symbol
turned into green) and the devices can communicate.
The Host has the IP address ‘192.168.1.2’ and it has
connected to the AWR300 using IP address ‘192.168.1.3’
and port ‘2010’.
Configuration
Screen
Details
After selecting ‘Configuration’, this men displays.
6.5.4.1
Set Factory Configuration
Screen
Details
‘Set Factory Configuration’ resets factory settings back to
default values. This may be useful if specific settings have
been changed and the AWR300 is not operating as intended
anymore. Note that this action cannot be undone. Settings
that differ from the factory defaults will have to be reset.
…confirm reset
… abort reset
