allen MSP445 страница 42 Скачать руководство пользователя

Страница: 42 / 124

3-4

SECTION 3

SERVICE

053430; 01/11

3.3

Drive Belt

3.3.0 Drive Belt Maintenance

The drive belts MUST be free from oil and

foreign contaminants to prolong life.

3.3.1 To Replace The Drive Belt:

1) The MSP445 is equipped with a spare belt located inside the belt guard.

2) Place the trowel on a flat, level surface with the blades pitched flat.

3) Disconnect the battery. Refer to Figure 3.3.1.

4) Use a M6x1.0x40 mm bolt to spread apart the pulleys to allow slack in the belt

and remove it from the lower and upper pulleys. Refer ti Figure 3.3.3.

5) Replace new belt in opposite order of removal.

6) Reconnect the battery.

3.3.2 To Add Drive Belt:

1) Place the trowel on a flat, level surface with the blades pitched flat.

2) Disconnect the battery. Refer to Figure 3.3.1.

3) Remove battery and plate assembly by removing (4) 5/16-18 x 1 bolts. Refer

to Figure 3.3.1

4) Disconnect and remove u-joint assembly by removing (4X) 1/4-20x3/4 socket

head round screws and 1/4 split lock washers on the driveshaft hub closest to

driven pulley. Refer to Figure 3.3.2.

5) Apply one drop of blue Loctite No. 242 to the (4X) 1/4-20x3/4 socket head

round screws and reassemble with 1/4 split lock washers in opposite order of

disassembly.

6) Install battery plate assembly with one drop blue Loctite No. 242 on the

5/16-18 x 1 bolts.

7) Reconnect the battery.

Содержание MSP445





























































































































Результаты поиска

Содержание MSP445

Отзывы:

Похожие инструкции для MSP445

Бренды по названию

Популярные бренды

allen MSP445, Руководство по эксплуатации и запасным частям

Результаты поиска

Содержание MSP445

Отзывы:

Похожие инструкции для MSP445

Бренды по названию

Популярные бренды