allen A-71100-BR, Руководство пользователя, Страница: 39 / 92

Allen® Advance Table User Manual (D-720686-A6) 31
a. At the foot end of the lateral top, insert the retaining posts in the
slots.
b. Align the head end of the lateral top pad with the end of the
lateral top and press down to secure the Velcro® fasteners.
c. Make sure that the lateral top pad is attached securely to the
lateral top.
6. Do a function check on the lateral top:
a. Make sure that the Lateral Surface Up/Down pendant controls
move the leg section of the lateral top up and down.
WARNING:
The Drawsheet (A-71706) must be placed on the lateral top before you
place the patient on the lateral surface for any surgical procedure that
requires a lateral-to-prone transfer. Patient injury can occur if patient
rotation is done without the use of the Drawsheet.
7. Put the Drawsheet on the lateral top. Refer to the instructions
included with the Drawsheet.
A
IR
B
LADDER AND
P
UMP
1. If necessary, insert the air bladder in the lateral top pad. There is a
sleeve with a Velcro® closure built into the lateral top pad.
2. If necessary, connect the air bladder to the air hose on the lateral top.
3. Connect the hose to the air pump and to
the air manifold at the head end of the
lateral top.
4. Connect the air pump to a wall power
outlet.
CAUTION:
Do not inflate the air bladder to more than 5 psi (0.03 MPa). Equipment
damage can occur.
5. Turn on the pump and inflate the air
bladder. When the air bladder is inflated to
the desired thickness, turn off the pump
and disconnect the pump tubing from the
lateral top.
6. To deflate the air bladder, activate the
deflate control on the air manifold at the
head end of the lateral top.