Allen Organ Company GeniSys Display, Справочное руководство, Страница: 5 / 43

4. Unlocking Memories Using Your Code
To unlock a selected memory level, touch the Memory level button on the GeniSys™ Display
to enter the memory level selection screen. Then, touch the padlock button to enter the
memory combo-lock screen. Using the six (6) available buttons, enter the three-digit lock
lock code that was used to lock the selected memory level. Once the code has been entered,
press the “ENTER” button to unlock the memory level. If a change to the number is needed
before the “ENTER” button is pressed, press the “RESET” button to clear the code to start
over. If the correct code was entered, the memory level will unlock, otherwise the memory
level will remain locked.
5. Stoplist Library

Most GeniSys™ model organs are equipped with multiple voicing suites.
To change the voicing suite, advance to the 'Stoplist
Library' menu function within GeniSys™ Display;
touch:
OPTIONS >> STOPLIST LIBRARY .
The display will indicate the current voicing suite
loaded. To change the voicing suite, use the UP and
DOWN buttons. Once the desired voicing suite is
displayed, touch the LOAD button. The display will
indicate the selected voicing suite is loading. Once the
voicing suite has loaded, the capture system will automatically cancel all stops indicating the
organ is now ready to play.
Important: The organ will not be able to be played while a new voicing suite is loading.
6. Acoustic Portrait

Several Acoustic Portrait parameters are controlled within GeniSys™ Display. To access the
Acoustic Portrait control screen, touch:
OPTIONS >> ACOUSTICS .
From this screen, Acoustic Portrait can be turned on or
off, the Acoustic Portrait selection may be changed
and the gain (volume) may also be adjusted. To turn
Acoustic Portrait on or off, touch the ON/OFF button.
The button will “toggle” the on or off status.
The gain is displayed in dB (decibels). The gain range
is adjustable from +6dB to minus 35dB. Minus 35dB
is the least amount of gain while +6dB is the most
amount of gain available. To change the gain value, touch the gain value button to highlight
it and then use the UP and DOWN buttons to change the gain value.
To change the Acoustic Portrait selection, touch the Acoustic Portrait selection button and use
the UP and DOWN buttons to change to a different Acoustic Portrait selection. Once the
desired selection is displayed, touch the SET button. Loading takes approximately 3 to 4
seconds to complete.
3