manualshive.com logo in svg

Allen Organ Company GeniSys Display, Справочное руководство, Страница: 25 / 43

Поделиться
Скачать
Allen Organ Company GeniSys Display Скачать руководство пользователя страница 25

2.

Selecting Program Change Modes

Program change modes establish how MIDI program changes are sent from the organ when a 
piston is pressed.  Once a particular program change mode is selected, the organ will retain 
the same program change mode (even when the organ is turned off) until a new program 
change mode is selected.  These three mode options determine how the organ sends program 
change information to MIDI devices.

Selecting a Program Change Mode

To access the Program Change mode function, touch:

  

OPTIONS >> MIDI >> PROGRAM CHANGE & DISPLAY OPTIONS

Important!

    It   is   important   to   understand   how   to 

operate and when to use each of these modes before 
they are changed!

Program Change Modes:

PRESET Mode:  This mode causes the organ to send a 
program change number equal to the piston number 
that is pressed.  Preset mode also causes the organ to 
transmit the capture memory level value whenever the 
capture  memory level  is changed  or whenever the CANCEL piston is pressed.   General 
Pistons will send program changes 1-10 on MIDI Channel 8, the organ’s General Piston 
control channel.  The Divisional Pistons for each division will send program changes on the 
respective MIDI channels as shown above.
For example, Swell Piston 1 will send Program Change 1 on MIDI Channel 1.  Great Piston 2 
will send Program Change 2 on MIDI Channel 2, etc.
USER Mode

:

  In this mode, the organ is capable of sending any program change number on 

any piston that will select voices, change banks, or change program “patch” numbers on 
another   MIDI   device.     Any   MIDI   program   change   number   from   1   through   128   can   be 
assigned to any General or Divisional Piston (blank or no digit may also be selected).  Any 
MIDI bank switch number between 0 and 127 can be assigned to any Divisional Piston.  As in 
PRESET mode, General Pistons will send program change information on MIDI Channel 8 
and   Divisional   Pistons   will   send   program   change   information   on   their   respective   MIDI 
channels.

Note:

  The capture memory level value is not transmitted while in USER mode.

NO Mode:  With this mode selected, NO program change information is either transmitted or 
received.

Display Options:  General MIDI Sound Names or Program Numbers

While in PRESET mode, MIDI program changes will only be displayed as MIDI program 
change numbers.  However, USER mode allows MIDI program changes to be displayed as 
either MIDI program change numbers or as General MIDI sound names.   This flexibility 
allows for simpler programming, especially if the connected MIDI sound module is General 
MIDI compatible.  Any piston can be programmed to access any General MIDI sound/voice 
by selecting and assigning the same name to a piston.

23

Содержание GeniSys Display












































Отзывы:

Нет отзывов