Allen-Bradley Studio 5000 Logix Emulate Скачать руководство пользователя страница 69

Страница: 69 / 172

Rockwell Automation Publication 1756-RM100F-EN-P - October 2018

Replacement Considerations with CompactLogix and Compact GuardLogix Systems

Chapter 3

Communication Options

CompactLogix 5380 and Compact GuardLogix 5380 controllers can operate
on EtherNet/IP networks.

CompactLogix 5370 L3 and Compact GuardLogix 5370 L3 controllers can
operate on EtherNet/IP and DeviceNet networks.

IMPORTANT

Be aware of the following:

• The 5380 controllers do not support for half-duplex communications on

Ethernet at any speed.

• We recommend that you consider some factors that affect how to set

EtherNet/IP network communication rate in your application during
design. For more information, see

Network Communication Rate

Considerations on page 169

Application Type

5370 Controllers Support

5380 Controllers Support

Network communication option

• EtherNet/IP

• DeviceNet via a 1769-SDN

scanner

• 1769-ASCII module for an

ASCII serial interface to RS-
232, RS-422 and RS-485
devices

• 1769-SM2 module for a

Modbus RTU serial interface

• MVI69-MNET for Modbus TCP/

IP interface

EtherNet/IP

EtherNet/IP mode options

Can be used in linear, DLR, and
star topologies.
Does not support for Dual-IP
mode.

• Linear/DLR mode

• Dual-IP mode - Available with

the Logix Designer
application, version 29 or later

Both modes can be used in linear,
DLR, and star topologies.

Integrated Motion

EtherNet/IP

Time Synchronization

EtherNet/IP - Available with Integrated Motion and non-motion
applications

Control of distributed I/O

• EtherNet/IP
• DeviceNet

EtherNet/IP

Produce/consume data between
controllers

EtherNet/IP

Messaging to and from other devices,
including access to the controller via Logix
Designer application

• EtherNet/IP
• DeviceNet (only to devices)

EtherNet/IP

Содержание Studio 5000 Logix Emulate













































































































































































Результаты поиска

Содержание Studio 5000 Logix Emulate

Отзывы:

Allen-Bradley Studio 5000 Logix Emulate, Справочное руководство, Страница: 69 / 172

Результаты поиска

Содержание Studio 5000 Logix Emulate

Отзывы: