SLC 5/01™ and SLC 5/02™ Modular Processors
9
Publication 1747-IN011B-MU-P - July 2002
Establish Communications with the Processor
1.
Connect the 1747-PIC to the processor and your personal computer.
2.
Set the communication parameters of the software to match the default
parameters of the processor:
–
DH-485
–
19.2k baud
–
Node Address = 1
Troubleshooting
Before troubleshooting your SLC 500 system, please obtain an SLC 500 Modular
Hardware Style User Manual (1747-UM011) from one of the sources listed on page
5. Refer to the chapter on Troubleshooting.
In addition to the SLC 500 Modular Hardware Style User Manual, the SLC 500
Instruction Set Reference Manual (1747-RM001) may also be obtained from the
sources listed on page 5. This manual contains explanations and examples for the
entire instruction set as well as for all status words and bits. It also contains
explanations for all possible fault codes found in status word S:6.
Specifications
Specification
SLC 5/01
(1747-L511, -L514)
SLC 5/02
(1747-L524)
Program Memory
1K or 4K Instructions
4K Instructions
Additional Data Storage
0
0
Maximum I/O Capacity
3940 discrete inputs
3940 discrete outputs
4096 discrete inputs
4096 discrete outputs
Max. Local Chassis/Slots
3/30
3/30
Programming Software
RSLogix 500™, PLC–500 A.I. Series™, APS, and HHT
Programming Instructions
52
71
Typical Scan Time
(1)
(1) The scan times are typical for a 1K ladder logic program consisting of simple ladder logic and
communication servicing. Actual scan times depend on your program size, instuctions used, and the
communication protocol.
8 ms/K
4.8 ms/K
Bit Execution (XIC)
4 µs
2.4 µs