Publication 17946.5.5 - October 1996
Summary of Changes
This publication contains new and revised information not included
in the last release.
New Information
Additional Flex I/O Modules
The following modules have been added to this publication:
•
8 Electronically Fused Output Module, cat. no. 1794-OB8EP
•
10 Input/6 Output Module, cat. no. 1794-IB10XOB6
•
SCANport Module, cat. no. 1203-FM1
Revised Information
All screens for selection and configuration of the Flex I/O adapter
and modules have been updated. New buttons have been added to the
screens for ease of movement between screens.
The “Set to Defaults” button has been changed to “Set to I/O Only.”
This applies the real time values for I/O (optimal settings) to the
module.
A “Memory” button has been added to the individual configuration
screen for each module. If you change your mind about any settings
you have made while you are on the configuration screen, clicking
on the “Memory” button returns you to the original settings.
The “Save to Flex I/O” no longer both saves and exits you. You must
click on the “Close” button to exit.
Change Bars
The areas in this manual which are different from previous editions
are marked with change bars (as shown to the right of this paragraph)
to indicate the addition of new or revised information.
