Allen-Bradley PowerFlex 755T, Руководство по установке

Страница: 1 / 24

Installation Instructions
Original Instructions
PowerFlex 755T Frames 5 and 6 Conduit Box with Debris Hood and
Ground Plate Kits
Catalog Numbers 20-750-CBOX1-F5, 20-750-CBOX1-F6, 20-750-GNDPLT-F5, 20-750-GNDPLT-F6
Product Advisories
Topic Page
Product Advisories 1
Required Tools 2
Frame 5 Conduit Box with Debris Hood Kit Contents (Cat. No. 20-750-CBOX1-F5) 2
Frame 5 Conduit Box Installation 3
Frame 6 Conduit Box with Debris Hood Kit (Cat. No. 20-750-CBOX1-F6) 9
Frame 6 Conduit Box and Debris Hood Installation 10
Frame 5 Ground Plate Kit Contents (Cat. No. 20-750-GNDPLT-F5) 16
Frame 5 Ground Plate Installation 17
Frame 6 Ground Plate Kit Contents (Cat. No. 20-750-GNDPLT-F6) 20
Frame 6 Ground Plate Installation 21
Additional Resources 23
ATTENTION: Only qualified personnel, which are trained and approved to install PowerFlex® 755T products and familiar with associated machinery, should plan
or implement the installation, start-up, and subsequent maintenance of the system. Failure to comply can result in personal injury and/or equipment damage.
ATTENTION: The information that is contained in this publication is merely a guide for proper installation. Rockwell Automation, Inc. cannot assume
responsibility for the compliance or the noncompliance to any code, national, local or otherwise for the proper installation of this drive or associated equipment.
A hazard of personal injury and/or equipment damage exists if codes are ignored during installation.
ATTENTION: This product contains Electrostatic Discharge (ESD) sensitive parts and assemblies. Static control precautions are required when you install these
assemblies. Component damage can result if ESD control procedures are not followed. If you are not familiar with static control procedures, reference any
applicable ESD protection handbook.