Allen-Bradley PanelView 800 2711R-T10T, Руководство пользователя, Страница: 130 / 158

130 Rockwell Automation Publication 2711R-UM001E-EN-E - January 2017
Appendix D Configure Security
3.
Click OK.
Change Terminal Password You must know the current password of the terminal to set a new one.
Follow these steps to change the password of the terminal.
1.
From the terminal toolbar, click Secure, then click Change Password.
2.
Enter the current password in the Old Password field.
IMPORTANT
If you forget the terminal password there is no way to recover
it. You can perform the restore terminal operation, or return the
terminal to the out-of-box configuration. Doing so will clear the
password and also remove all applications, logs, recipes,
user-installed font files, objects and graphics. See
Returning to
the Out-of-box Condition on page 112 and Restoring the
Terminal on page 113 for more information.
Alternatively, you can update the terminal firmware to the same
or later firmware revision. Doing so will clear the password and
other settings, but your applications, recipes, and fonts will be
retained. See
Upgrade Firmware on page 77 for more
information.
IMPORTANT
If the terminal is password protected using Connected
Components Workbench software version 10 or later, you
cannot download an application to the terminal using
Connected Components Workbench software version 9 or
earlier. An error message stating the system is busy will be
shown in the output window under the Graphic Terminal
message list.