Allen-Bradley Kinetix 5700 Series Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 20

Allen-Bradley Kinetix 5700 Series Скачать руководство пользователя страница 18

18

Rockwell Automation Publication 2198-IN014A-EN-P - August 2018

Kinetix 5700 Regenerative Bus Supply

Specifications

Attribute

2198-RP088

2198-RP200

2198-RP263

2198-RP312

Surrounding air temperature

Operating
Storage

0…50 °C (32…122 °F)
-40…70 °C (-40…158 °F)

Weight, kg (lb) approx

13.6 (30)

38.6 (85)

61.2 (135)

61.2 (135)

Short-circuit current rating

200,000 A rms symmetrical

Branch-circuit short-circuit
protection

Integral solid-state short circuit protection does not provide branch circuit protection. Branch
circuit protection must be provided in accordance with the National Electric Code (NEC) and any
additional local codes.

Leakage
current

• Kinetix 5700 drives produce leakage current in the protective-earthing conductor that exceeds 3.5 mA AC and/

or 10 mA DC. The minimum size of the protective-earthing (grounding) conductor used in the application must
comply with local safety regulations for high-protective-earthing conductor current equipment.

• Kinetix 5700 drives produce DC current in the protective-earthing conductor and can reduce the ability of a

residual current device (RCD) or residual current monitor (RCM) of type A or AC to provide protection for the
drive module and other equipment in the installation.

«
...
16
17
18
19
20
»

Содержание Kinetix 5700 Series





















Отзывы:

Нет отзывов