Allen-Bradley CENTERLINE 2100, Руководство по установке, Страница: 60 / 136

60 Rockwell Automation Publication 2100-IN012G-EN-P - August 2016
Chapter 4 Installing and Removing Plug-in Units
6. Place the wiring/terminal block in the vertical wireway to the right of
unit.
7. Push the latch mechanism to the left with your right hand.
8. Pull the unit forward (outward) approximately 3 in. (7.62 cm) out of the
MCC.
You can reposition your hands, as necessary, to properly support the unit
while you are removing the unit from the MCC.
For the CENTERLINE 2100 MCC units with swing-out door latches,
you need to rotate the latch bracket 90
o
clockwise to avoid interference
with the unit.
ATTENTION: Plug-in MCC units can be heavy or awkward to handle. Use an
assistant or a platform lift device if necessary to help you handle the unit.
Swing-out
Latch
Bracket