Allen-Bradley armorstratix 5700, Руководство пользователя, Страница: 46 / 458

46 Rockwell Automation Publication 1783-UM007I-EN-P - December 2017
Chapter 2 Get Started
Access Device Manager
With IOS release 15.2(5)EA.fc4 and later, Device Manager provides a secure
connection via the latest version of Internet Explorer or Firefox. Security
messages from your browser can appear when you access Device Manager.
To make sure that Device Manager runs properly, disable any popup blockers
or proxy settings in your browser and any wireless clients on your computer.
Device Manager verifies the browser version when starting a session to be sure
that the browser is supported.
To access Device Manager, follow these steps.
1.
Start a web browser session and go to the switch IP address .
2.
(Internet Explorer). If one of the following messages appear, click the
links circled in the following images to proceed to Device Manager.
IMPORTANT With IOS release 15.2(6)E0a and later, Device Manager has an auto-logout
feature:
• If you upgrade to IOS release 15.2(6)E0a and use the Express Setup
process, Device Manager automatically logs you out if you are inactive
for 20 minutes or longer.
• If you reset the switch to factory defaults or set up the switch via the CLI
instead of Express Setup, Device Manager automatically logs you out if
you are inactive for 3 minutes or longer.
To configure the inactivity timeout value for Device Manager sessions, use
the following CLI command:
ip http session-idle-timeout [seconds]
Example: ip http session-idle-timeout 1200
IMPORTANT If you set up bookmarks for accessing previous versions of
Device Manager, be sure to recreate new bookmarks. Addresses that
end with /homed.shtml do not provide the latest login
authentication method.