manualshive.com logo in svg

Allen-Bradley armorstratix 5700, Руководство пользователя, Страница: 43 / 458

Поделиться
Скачать
Allen-Bradley armorstratix 5700 Скачать руководство пользователя страница 43

Rockwell Automation Publication 1783-UM007I-EN-P - December 2017

43

Get Started

   Chapter 2

Linx-based Software and 
Network Who Support

The EtherNet/IP network interface also supports the List Identity command 
that is used by CIP-based network tools, such as the Linx-based software 
RSWho function. RSWho enables you to locate and identify your switch on 
the network by using the electronic data sheet (EDS) files.

To access the RSWho function, from the Linx-based software toolbar, choose 
Communications > RSWho.

Electronic Data Sheet (EDS) Files

Electronic Data Sheet (EDS) files are text files that are used by network 
configuration tools, such as RSNetWorx™ for EtherNet/IP software. EDS files 
help you identify products and commission them on a network. EDS files 
contain details about the readable and configurable parameters of the device. 
They also provide information about the I/O connections the device supports 
and the content of the associated data structures.

If you are using the switch in a system without a Rockwell Automation Logix 
controller, you cannot use the AOP supplied with Logix controllers. You must 
use information from the EDS files to configure the I/O connection.

EDS files for the Stratix switches are included with the following software 
packages:

•

Linx-based software

•

Studio 5000® programming environment

•

RSNetWorx for EtherNet/IP software

You can also obtain the EDS files in either of these two ways:

•

By downloading it from

http://www.rockwellautomation.com/resources/eds/

.

•

By using the EDS Hardware Installation tool included in the 
Studio 5000 environment.

IMPORTANT

After using the RSWho function, if you access the switch and view the 
Ethernet link counters, you see the counts for only the first port (Port Gi1/1).

Содержание armorstratix 5700











































































































































































































































































































































































































































































Отзывы:

Нет отзывов