Allen-Bradley armorstratix 5700, Руководство пользователя, Страница: 36 / 458

36 Rockwell Automation Publication 1783-UM007I-EN-P - December 2017
Chapter 2 Get Started
Table 10 - PNP Mode Fields
Field Description
Management Interface (VLAN) The ID of the management VLAN through which the switch is managed. The management VLAN is the broadcast domain through which
management traffic is sent between specific users or devices. It provides broadcast control and security for management traffic that must be
limited to a specific group of users. It also provides secure administrative access to all devices in the network.
Choose an existing VLAN as the management VLAN. The default management VLAN ID is 1.
IMPORTANT: Be sure that the switch and your network management station are in the same VLAN. Otherwise, you lose management
connectivity to the switch.
IP Address The IP address and associated subnet mask are unique identifiers for the switch in a network:
• The IP address format is a 32-bit numeric address that is written as four numbers that are separated by periods. Each number can be from
0…255.
• The subnet mask is the network address that identifies the subnetwork (subnet) to which the switch belongs. Subnets are used to segment
the devices in a network into smaller groups. The default is 255.255.255.0.
Make sure that the IP address that you assign to the switch is not being used by another device in your network.
Default Gateway The IP address for the default gateway. A gateway is a router or a dedicated network device that enables the switch to communicate with
devices in other networks or subnetworks. The default gateway IP address must be part of the same subnet as the switch IP address. The
switch IP address and the default gateway IP address cannot be the same.
If all of your devices are in the same network and a default gateway is not used, leave this field blank.
If your network management station and the switch are in different networks or subnetworks, you must specify a default gateway. Otherwise,
the switch and your network management station cannot communicate with each other.
PNP Server IP The IP address of the PnP server.
PNP Server Port The port number to use to connect to the PnP server.
User Enter the user name for the switch.
Password, Confirm Password The password for the switch can have a maximum of 63 alphanumeric characters, can start with a number, is case-sensitive, and can have
embedded spaces. The password cannot be one digit, it cannot contain a ? or a tab, and it does not allow spaces at the beginning or the end.
The default is switch .
To complete initial setup, you must change the password from the default password, switch .
This password is also used as the Control Industrial Protocol (CIP) security password. We recommend that you provide a password to the switch
to secure access to Device Manager.