manualshive.com logo in svg

Allen-Bradley armorstratix 5700, Руководство пользователя, Страница: 335 / 458

Поделиться
Скачать
Allen-Bradley armorstratix 5700 Скачать руководство пользователя страница 335

Rockwell Automation Publication 1783-UM007I-EN-P - December 2017

335

Troubleshoot the Switch

   Chapter 5

Restart or Reset the Switch

If you cannot solve an issue by reconfiguring a feature, you can restart or reset 
the switch to solve the issue. If the issue exists after you reset the switch to its 
default settings, it is unlikely that the switch is causing the issue.

Restart or Reset the Switch from Device Manager

From the Admin menu, choose Restart/Reset.

ATTENTION: 

Resetting the switch deletes all customized switch settings, including the IP address, and returns the switch to its 

factory default. The same software image is retained. To manage the switch or display Device Manager, you must reconfigure 
switch settings, as described in 

Chapter 2

, and use the new IP address.

IMPORTANT

When you restart or reset the switch, connectivity of your devices to the network is interrupted.

Option

Method

Description

Restart

•

Device Manager

•

Logix Designer application

This option restarts the switch without turning off power. The switch retains its saved configuration settings 

during the restart process. However, Device Manager is unavailable during the process. When the process 
completes, the switch displays Device Manager.

Reset the switch 
to factory defaults

•

Device Manager

•

Express Setup button

This option resets the switch, deletes the current configuration settings, returns to the factory default 

settings, and then restarts the switch.

Table 128 - Restart/Reset Fields

Field

Description

Save running configuration and then restart the switch

Saves any changes in the running configuration before the switch restarts.

Restart the switch without saving running configuration

Restarts the switch with its previously saved configuration settings.

Reset the switch to factory defaults, and then restart the switch

Resets the device to the factory default settings, which deletes the current configuration settings, and then 
restarts the device. 

You lose connectivity with the device and must run Express Setup to reconfigure the device.

Содержание armorstratix 5700











































































































































































































































































































































































































































































Отзывы:

Нет отзывов