Allen-Bradley armorstratix 5700, Руководство пользователя, Страница: 245 / 458

Rockwell Automation Publication 1783-UM007I-EN-P - December 2017 245
Configure Switch Features Chapter 3
Configure a Stratix 5700 or ArmorStratix 5700 Switch for
PROFINET Management
Stratix 5700 and ArmorStratix 5700 switches contain a PROFINET GSD
(General Station Description) file that contains basic information about the
switch for data exchange between the I/O controller, the I/O supervisor, and
the I/O devices, including the switch. Each PROFINET I/O device must have
an associated GSD file that describes the properties of the device and contains
all this information required for configuration:
•
Device identification information (device ID, vendor ID and name,
product family, and number of ports)
•
Number and types of connected modules
•
Error text for diagnostic information
•
Communication parameters for I/O devices, including the minimum
cycle time, the reduction ratio, and the watch dog time
•
Configuration data for the I/O modules, including speed, duplex,
VLAN, port security information, alarms, and broadcast-rate-limiting
thresholds
•
Parameters configured for I/O modules
The GSD file name includes the last modification date and represents the
version of the file, for example GSDML_V2.32-Rockwell-S5700-xxxxxx
where xxxxx is the modification date. The date is updated when changes are
made to the GSD file with each IOS release.
Stratix 5700 and ArmorStratix 5700 switches store the GSD file and image
files of the switch models in a file named Rockwell_S5700_GSD.zip. The file
is located in the IOS folder on the switch.
IMPORTANT You must use the GSD file that is associated with the IOS release on the
switch to manage your PROFINET network. To verify that the GSD file on the
switch matches the GSD file in your controller configuration software, see
Verify the GSD File on page 248 .