Wiring Diagrams
1732E ArmorBlock Dual-Port EtherNet/IP
4-Point Analog Modules
Catalog Numbers 1732E-IF4M12R, 1732E-OF4M12R, 1732E-IT4IM12R,
1732E-IR4IM12R
Parts List
Your package contains one 1732E ArmorBlock™ module and these pinout guide
wiring instructions.
For complete installation instructions, refer to the Module Publication Number
table and visit
http://rockwellautomation.com/literature
.
Module Publication Number
Module
Publication Number
1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Analog Input
and Output Modules (1732E-IF4M12R, 1732E-OF4M12R)
1732E ArmorBlock Dual-Port EtherNet/IP 4-Point Thermocouple
and RTD Input Modules (1732E-IT4IM12R, 1732E-IR4IM12R)
ATTENTION:
Two sets of mounting holes are used to mount the module
directly to a panel or machine. Mounting holes accommodate #6 (M3) pan
head screws. The torque specification is 0.68 Nm (6 lb-in.).
ATTENTION:
To comply with the CE Low Voltage Directive (LVD), this
equipment and all connected I/O must be powered from a source compliant
with the following: Safety Extra Low Voltage (SELV) or Protected Extra Low
Voltage (PELV).
ATTENTION:
To comply with UL restrictions, this equipment must be
powered from a source compliant with the following: Limited
Voltage/Limited Current.