Rockwell Automation Publication 6300B-UM002A-EN-P - October 2020
21
Chapter
3
Operate the Wall Mount Box PC
Operating Guidelines
Follow these operating guidelines for your VersaView® 6300B wall mount box
PC.
•
When the box PC is mounted in an enclosure, keep the enclosure door
closed during operation so dust and other airborne contamination do
not infiltrate the computer. Open the door only for routine
maintenance.
•
For box PCs with a Microsoft Windows® operating system (OS), always
use the proper power down procedures as required, such as the Shut
Down command in the Windows OS.
•
Do not apply power again until shutdown is complete.
Start the Wall Mount Box PC
Follow these steps to start your VersaView 6300B wall mount box PC.
1.
Make sure that all necessary peripheral devices are connected to the
corresponding I/O ports on the box PC.
2. Make sure any connected components with separate power supplies
(such as an external display) are turned on first.
3. To power on the box PC, perform the following:
• AC powered models: Turn on the power switch, which is on the
bottom of the box PC chassis.
• DC powered models: Turn on the main power switch or breaker.
Light-emitting Diode and
Button Descriptions
After a VersaView 6300B wall mount box PC is powered on, various light-
emitting diodes (LEDs) monitor its state. Use these LEDs to determine if they
are lit and what color they emit.
There are also buttons on the computer to reset computer states that are
monitored by the LEDs.
IMPORTANT
The following steps apply to when the box PC must be started manually, and
power has been connected already.
See
for when power is applied to the box PC for
the first time.
