Rockwell Automation Support
Use the following resources to access support information.
Documentation Feedback
Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this document, complete the How Are We Doing? form at
Technical Support Center
Knowledgebase Articles, How-to Videos, FAQs, Chat, User Forums, and Product Notification Updates.
Knowledgebase
Knowledgebase Articles
Local Technical Support Phone Numbers
Locate the phone number for your country.
Literature Library
Installation Instructions, Manuals, Brochures, and Technical Data.
Product Compatibility and Download Center (PCDC)
Get help determining how products interact, check features and capabilities, and find associated firmware.
Allen-Bradley, Rockwell Automation, and Rockwell Software are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400
Publication 6181X-PC001C-EN-P - February 2020
PN-450313
DIR 10003191694_02
Supersedes Publication 6181X-PC001B-EN-P - September 2017
Copyright © 2020 Rockwell Automation, Inc. All rights reserved. Printed in China.
Rockwell Automation maintains current product environmental information on its website at
*PN-450313*
PN-450313
Follow these steps to install the sun shield.
1. With a small screwdriver, remove the screw overlay label above the integrated display to expose the six screw
holes.
2. With the cleaning solvent and cloth, clean the whole perimeter of the integrated display where the sun
shield is to be installed.
3. Align the holes on the sun shield with the six screw holes.
4. Install the six supplied M4x8 screws loosely by hand; do not hand tighten them.
5. To access each side of the sun shield, tilt the sun shield backwards.
6. Remove the adhesive strip backing from each side of the sun shield.
7. Align both sides of the sun shield so they are completely against the surface on each side of the integrated
display.
8. After both sides are aligned, press down firmly to affix each side of the sun shield to the computer.
9. With a 4 mm screwdriver or hex key, tighten the six screws.
For best results, tighten each screw to a torque of 6…8 lb•in (0.7…0.9 N•m).
Certifications
For the most current information on all certifications for 6181X computers, visit the Rockwell Automation
Product Certifications website at
.
Additional Resources
These documents contain more information about related products from Rockwell Automation.
You can view or download publications at
.
IMPORTANT
For the best adhesion results, apply the sun shield when the temperature is 10 °C (50 °F)
or higher.
In temperatures below 10 °C (50 °F), the adhesive strips on the sun shield become too
firm to adhere readily.
Screw Overlay Label
Integrated Display
Attribute
6189V-CFSSD8GB, 6189V-CFSSD16GB, 6189X-8GDDR3, 6189X-16GDDR3,
6189X-128GBSSD, 6189X-256GBSSD, 6189X-SUNSHIELD
RoHS
Turkey RoHS (EEE Yönetmeliğine Uygundur. In Conformity with the EEE Regulation)
UAE RoHS
EAC
Resource
Description
Industrial Computers for Hazardous
Locations, Series H, Installation
Instructions, publication
Provides basic overview on how to install and operate Series
H of 6181X industrial computers for hazardous locations.
Industrial Computers for Hazardous
Locations, Series H, User Manual,
publication
Provides detailed information on how to install, configure,
and operate Series H of 6181X industrial computers and
accessories for hazardous locations.
Industrial Automation Wiring and
Grounding Guidelines, publication
Provides general guidelines for installing a Rockwell
Automation® industrial system.
Product Certifications website,
Provides declarations of conformity, certificates, and other
certification details.
