background image

Industrial Integrated Display Computers with Keypad     

19

Rockwell Automation Publication 6180P-IN001C-EN-P - July 2013

Additional Resources

For additional information about the 6180P Integrated Display Computers with Keypad, refer 
to the following publications.

You can view or download publications at 

http://www.rockwellautomation.com/literature/

To order paper copies of technical documentation, contact your local Allen-Bradley distributor 
or Rockwell Automation sales representative.

Resource

Description

6180P Integrated Display Computer with Keypad 
user manual, publication number 

6180P-UM001

Overview of the system and description of procedures for installation, 
connections, configuration, and troubleshooting.

Cloning Utility for Industrial Computers, publication 
number 

6000-TD001

Information on using the cloning utility to create a back-up image of your 
computer’s hard disk drive.

Industrial Automation Wiring and Grounding 
Guidelines, publication

 1770-4.1

Provides general guidelines for installing a Rockwell Automation industrial 
system.

Product Certifications website, 

http://www.rockwellautomation.com/rockwellauto
mation/certification/overview.page

Provides declarations of conformity, certificates, and other certification 
details.

Содержание 6180P-12BPXP





















Отзывы: