Allen-Bradley 193-DNENCAT Скачать руководство пользователя страница 77

Страница: 77 / 112

Rockwell Automation Publication 193-UM014C-EN-P - August 2016

Email/Text

Chapter 8

If desired, you can set a password within the Administrative Settings tab.

4. Type the information into the email notification fields as shown.

5. Check the desired notification time, fault conditions, and local

conditions to be included in notification emails to the recipient. You can

change these values after the initial configurations.

6. Click Apply Changes to save the configuration.

Configure Device Identity

The properties of the Device Identity populate the notification email subject

and email body. To configure the Device Identity, perform the following steps.

1. Select Administrative Settings>Device Identity.

Email Recipient

The email address of the person who receives the notifications.

Email Sender

The email address from which the notification is sent.

SMTP Server

Consult with the network administrator for the SMTP server address.

SMTP Username

Consult with the network administrator for the SMTP username.

SMTP Password

Consult with the network administrator for the SMTP password.

SMTP Port

Consult with the network administrator which SMTP port number to use. Port 25 is the

most common SMTP port.

Содержание 193-DNENCAT

















































































































Результаты поиска

Содержание 193-DNENCAT

Отзывы:

Allen-Bradley 193-DNENCAT, Руководство пользователя, Страница: 77 / 112

Результаты поиска

Содержание 193-DNENCAT

Отзывы: