Allen-Bradley 1734-IB8S Скачать руководство пользователя страница 88

Страница: 88 / 156

Rockwell Automation Publication 1734-UM013C-EN-P - August 2010

Chapter 6

Configure the Module in a GuardLogix Controller

Configuration Ownership

The connection between the owner and the POINT Guard I/O module is based
on the following:

•

POINT Guard I/O module number

•

POINT Guard I/O safety network number

•

GuardLogix slot number

•

GuardLogix safety network number

•

Path from GuardLogix controller to POINT Guard I/O module

•

Configuration signature

If any of these change, the connection between the GuardLogix controller and
the POINT Guard I/O module is lost, and the yellow yield in the RSLogix 5000
tree appears. For more information, see

Chapter

Configuration Signature

The configuration signature is created by RSLogix 5000 software and verified by
the POINT Guard I/O module. The configuration signature provides SIL 3
integrity of the configuration of a POINT Guard I/O module. For detailed
information on the configuration signature, refer to the GuardLogix Controllers
User Manual, publication

1756-UM020

Содержание 1734-IB8S





























































































































































Результаты поиска

Содержание 1734-IB8S

Отзывы:

Allen-Bradley 1734-IB8S, Инструкция по установке и эксплуатации, Страница: 88 / 156

Результаты поиска

Содержание 1734-IB8S

Отзывы: